Freebsd su Dell Poweredge 2850

Cristiano Deana cris a gufi.org
Lun 7 Feb 2005 08:54:21 CET


On Monday 07 February 2005 01:52, Mario Ciccarelli wrote:

> Si, il mio dubbio era per il controller Perc 4E. Per il resto non credo 
> di aver problemi di compatibilita' hw.
 
Potrebbe esser questo?

mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xec00-0xecff mem 
0xdfde0000-0xdfdeffff,0xdfdf0000-0xdfdfffff irq 42 at device 4.0 on pci2
mpt0: [GIANT-LOCKED]
amr0: <LSILogic MegaRAID> mem 0xd80f0000-0xd80fffff irq 37 at device 5.0 on 
pci2
amr0: [GIANT-LOCKED]
amr0: <LSILogic PERC 4/SC> Firmware 350O, BIOS 1.09, 64MB RAM

mpt0 a pci2:4:0:  class=0x010000 card=0x01831028 chip=0x00301000 rev=0x08 
hdr=0x00
    vendor   = 'LSI Logic (Was: Symbios Logic, NCR)'
    device   = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller'
    class    = mass storage
    subclass = SCSI
amr0 a pci2:5:0:  class=0x010400 card=0x05201028 chip=0x19601000 rev=0x01 
hdr=0x00
    vendor   = 'LSI Logic (Was: Symbios Logic, NCR)'
    class    = mass storage
    subclass = RAID

-- 
Cristiano Deana - FreeCRIS
"Ho iniziato a usare FreeBSD perche' m$ usava me. ed e' spiacevole"
[cris|crs] in irc su: irc.azzurra.org #freebsd-it #qmail-it
gpg key http://www.GUFI.org/~cris/gufi.asc



Maggiori informazioni sulla lista aiuto