FreeBSD e Canon Canonscan lide 60.

Debian User Luciano luisaia a tin.it
Dom 21 Maggio 2006 12:59:14 CEST


Ciao a tutti,
ho aggiornato la versione 6.0 alla 6.1 ma non riesco a utilizzare lo scanner
Canon Lide 60 con xsane. 
All'avvio vede il dispositivo 
ugen0: Canon CanoScan, rev 2.00/3.06, addr 2
con sane-find-scanner come su ottengo
----
This is sane-find-scanner from sane-backends 1.0.17

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/scanner0... failed to open (Invalid argument)
checking /dev/scanner1... failed to open (Invalid argument)
checking /dev/pass0... open ok
found SCSI CD-drive "HL-DT-ST CD-RW GCE-8481B 1.00" at /dev/pass0
checking /dev/pass1... open ok
found SCSI CD-drive "ATAPI CD-ROM 52X 172A" at /dev/pass1
checking /dev/pass2... failed to open (Invalid argument)
checking /dev/pass3... failed to open (Invalid argument)
checking /dev/pass4... failed to open (Invalid argument)
checking /dev/pass5... failed to open (Invalid argument)
checking /dev/pass6... failed to open (Invalid argument)
checking /dev/pass7... failed to open (Invalid argument)
  # Your SCSI scanner was detected. It may or may not be supported by SANE. Try
  # scanimage -L and read the backend's manpage.

searching for USB scanners:
checking /dev/uscanner... failed to open (Invalid argument)
checking /dev/uscanner0... failed to open (Invalid argument)
checking /dev/uscanner1... failed to open (Invalid argument)
checking /dev/uscanner2... failed to open (Invalid argument)
checking /dev/uscanner3... failed to open (Invalid argument)
checking /dev/uscanner4... failed to open (Invalid argument)
checking /dev/uscanner5... failed to open (Invalid argument)
checking /dev/uscanner6... failed to open (Invalid argument)
checking /dev/uscanner7... failed to open (Invalid argument)
checking /dev/uscanner8... failed to open (Invalid argument)
checking /dev/uscanner9... failed to open (Invalid argument)
checking /dev/uscanner10... failed to open (Invalid argument)
checking /dev/uscanner11... failed to open (Invalid argument)
checking /dev/uscanner12... failed to open (Invalid argument)
checking /dev/uscanner13... failed to open (Invalid argument)
checking /dev/uscanner14... failed to open (Invalid argument)
checking /dev/uscanner15... failed to open (Invalid argument)
found USB scanner (vendor=0x04a9 [Canon], product=0x221c [CanoScan], chip=GL841) at libusb:/dev/usb4:/dev/ugen0
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.
done
----

se provo scanimage -L 
----
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages
----
la configurazione di sane /usr/local/etc/sane.d/genesys.conf 
# Canon LiDE 60
usb 0x04a9 0x221c


Qualcuno ha qualche idea
Molte grazie.
-- 
Isaia Luciano
FreeBSD user


Maggiori informazioni sulla lista aiuto